ALTOS-Loose-Tube-Gel-Free-Outdoor-Optical-fiber-Cables, 2 F, multimode (OM1)

ALTOS-Gel-Free, 2 F, multimode (OM1)

Corning ALTOS® all-dielectric gel-free cables are designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The loose tube gel-free design is fully waterblocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
Features And Benefits

 • Fiber Category: 62.5 µm MM (OM1)
 • Standards: according to National Electrical Code® (NEC®) Article 770
 • Design and Test Criteria: ANSI/ICEA S-87-640
 • Fiber Count: 2
 • Fiber Coloring: Blue, Orange
 • Number of Tube Positions: 6
 • Number of Active Tubes 1
 • Outer Jacket Color: Black
 • Operation: -40 °C to 70 °C (-40 °F to 158 °F )
 • Max. Tensile Strength,: Short-Term 2700 N (600 lbf)
 • Weight: 73 kg/km (49 lb/1000 ft)
 • RoHS: Free of hazardous substances according to RoHS 2011/65/EU
 • Fiber Category: 62.5 µm MM (OM1)
 • Wavelengths: 850 nm / 1300 nm
 • Maximum Attenuation: 3.4 dB/km / 1.0 dB/km
 • Serial 1 Gigabit Ethernet: 300 m / 550 m
 • Serial 10 Gigabit Ethernet: 33 m / - m
 • Min. Overfilled Launch (OFL) Bandwidth: 200 MHz*km / 500 MHz*km
 • Minimum Effective Modal Bandwidth (EMB): 220 MHz*km / - MHz*km
 • Gel-free waterblocking technology / Craft-friendly cable preparation
 • Medium-density polyethylene jacket /Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors)
 • All-dielectric construction /Requires no grounding or bonding

Part/Number: 002KU4-T4130D20