ALTOS® Loose Tube, Gel-Free Cable, 156 F, Single-mode (OS2) - Corning

ALTOS® Loose Tube, Gel-Free Cable, 156 F, Single-mode (OS2) - Corning

Corning ALTOS® all-dielectric gel-free cables are designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The loose tube gel-free design is fully waterblocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
Features And Benefits

 • Fiber Category: Single-mode (OS2)
 • Standards: according to National Electrical Code® (NEC®) Article 770
 • Design and Test Criteria: ANSI/ICEA S-87-640
 • Fiber Count: 156
 • Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
 • Number of Tube Positions: 18
 • Number of Active Tubes 13
 • Outer Jacket Color: Black
 • Operation: -40 °C to 70 °C (-40 °F to 158 °F )
 • Max. Tensile Strength,: Short-Term 2700 N (600 lbf)
 • Weight: 147 kg/km (49 lb/1000 ft)
 • RoHS: Free of hazardous substances according to RoHS 2011/65/EU
 • Fiber Category: G.652.D
 • Wavelengths: 1310 nm / 1383 nm / 1550 nm
 • Maximum Attenuation: 0.35 dB/km / 0.35 dB/km / 0.25 dB/km
 • Minimum Effective Modal Bandwidth (EMB): 4700 MHz*km / - MHz*km
 • Gel-free waterblocking technology / Craft-friendly cable preparation
 • Medium-density polyethylene jacket /Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors)
 • All-dielectric construction /Requires no grounding or bonding

Part/Number: 156EU4-T4100D20