OpDAT duplex, Patch cord, Multi mode, OM3, 2xST/2xST - METZ Connect

OpDAT duplex, Patch cord, Multi mode, OM3, 50/125 µm, 2xST/2xST

Features And Benefits

 • laser-optimized, bend insensitive multimode fiber OM3, G50/125 µm according to IEC 60793-2-10 type A1a.2
 • All fibers are bend insensitive.
 • multi mode patch cord I-V(ZN)H 50/125 OM3
 • Duplex patch cords are logically crossed as a standard (A->B, B->A), logically uncrossed patch cords available on request.
 • SC and LC connectors of duplex patch cords are always connected by duplex clips, ST are supplied without clips.
 • Available in lengths between 0.5 to 20 m. The use of duplex connection cables is recommended for lengths of more than 20 m because of the higher mechanical strength.
 • Low smoke, halogen free, flame retardant cable jacket (LSHF-FR)
 • outer diameter 2.0 x 4.2 mm
 • cable color: aqua
 • Insertion loos : max. 0.4 dB
 • Return loos : min. 35 dB
 • duplex cord as zip-cord (figure 8) with two tight buffered fibers and aramide strain relief 100 % tested
 • Multi mode patch cords are tested by 100 % on insertion loss and return loss at 1310 and 1550 nm. An interferometer measurement is done in addition.
 • The measurement is followed by a final visual control of the connectors according to IEC 61300-3-35.
 • All patch cords are provided with a serial number and a barcode. This allows traceability and measured values can be made available at any time.

Part/Number: 151J1AOAOXXE