Copper Network DCCS2 subassembly C6A MTC1 - METZ Connect

DCCS2 subassembly Cat.6A MTC1 - METZ Connect

Features And Benefits

 • 6 port RJ45 subassembly to mount one 24-pair installation cable AWG26 or AWG23
 • component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified by GHMT
 • compliance with class EA up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, certified by GHMT
 • tested: components up to 600 MHz, link up to 800 MHz
 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
 • Alien Next optimized, shielded jacks
 • the locking levers of patch cords connected to DCCS2 subassemblies show upwards and are easy to handle at any time
 • connection of one data cable AWG 26/1 to 22/1 (solid wire) to LSA IDC terminal blocks
 • marking of conductor assignment to T568A
 • solid and refined assembly housing
 • shield tap for installation cable separate from strain relief
 • Standards:ISO/IEC 11801 Ed.2.2: 2011-06 | DIN EN 50173-1: 2011-09 TIA/EIA 568-C.2 (2009-08)
 • mounting version: DCCS2

Part/Number: 130D2CM1-E